WATER-BASED COLORLESS WALL PATINA

CHARACTERISTICS
This unctuous aqueous wax allows to realize colorless decorations or in the most original and personalized colors, while preserving the traditional aspect of the pigments. They can be infinitely modulated on many supports, coatings of all kinds with small or large reliefs. The decoration can be different depending on the preparation of the coating.

-Raw coating: the wax clings more and gives more sustained decorations.

– Waxed coating : on a rough coating, apply a colorless wax and then after drying, apply a colored wax to obtain more pastel tones.

– Painted plaster: Cover the plaster with a coat of matte paint, obtaining more pastel colors than the previous preparation.

APPLICATION
Mix well before use.

IMPORTANT
Note when mixing the Decorative Earths the exact quantities in order to reproduce the color. The surface must be dry and dust free. Using a quality wide brush or sponge, spread the wax in thin, even layers. Additional shading can be done before drying with a clean brush or cloth. After drying, shine with a bristle brush or a wool cloth. It is advisable to start on an inconspicuous part, on the side of the light source. Do not stop the application in the middle of a panel. NB: it is advisable to have this work done by the same person.

Cleaning of tools: with water.

Coverage: 12 to 16 m2 per liter depending on the surface.

PRECAUTIONS FOR USE
Safety precautions : – Read the safety label carefully – Work in a well ventilated room – Wear rubber gloves – Do not swallow – Keep out of reach of children.

Information given in good faith, but we are not responsible for it.

see data sheet